Licensed, bonded, and insured to build

The paperwork that lets an owner award with confidence. We carry the licensing, bonding capacity, and insurance coverage required for commercial and public design-build work in Arizona.

Licensing

Four Arizona ROC licenses — one self-performing contractor

Our four active Arizona Registrar of Contractors licenses are what make true single-source design-build possible. Each of our self-performed disciplines is backed by its own classification — electrical, HVAC, engineering, and building — all held by one contractor, so the entire scope lives under licenses we hold ourselves rather than subcontracted out.

General — Building

ROC 329360 · Dual KB-1

KB-1 Dual Building Contractor — ground-up commercial building and general contracting.

General — Engineering

ROC 312437 · Dual KA

KA Dual Engineering Contractor — heavy-civil and underground utility / site infrastructure work.

Specialty — Electrical

ROC 276948 · Dual CR-11

CR-11 Electrical Contractor — service & distribution, lighting, life-safety, special systems, and controls.

Specialty — HVAC

ROC 326401 · Dual CR-39

CR-39 Air Conditioning & Refrigeration Contractor — mechanical / HVAC integration.

All four licenses are issued by the Arizona Registrar of Contractors. Each license number above links directly to its record in the ROC contractor search, where you can confirm the class, the qualifying party, the renewal date, and that the license is active. Beyond ROC licensing, Arizona Electrical Solutions is a Tesla Certified Installer for EV charging equipment — see our commercial EV charging capability.

Licensing — Scope Detail

What the KA General Engineering license actually covers

“Engineering” in Arizona contractor licensing is the heavy-civil classification — it is what authorizes a company to build infrastructure, and it is earned by trade examination. It is separate from the professional engineering registration that lets someone seal drawings; where a project needs sealed drawings, we coordinate them. Our KA Dual Engineering license (ROC 312437) carries the commercial A — General Engineering scope, which the Arizona Administrative Code (R4-9-102) defines as constructing or repairing:

  • Fixed works
  • Streets
  • Roads
  • Power and utility plants
  • Dams
  • Hydroelectric plants
  • Sewage and waste disposal plants
  • Bridges
  • Tunnels
  • Overpasses
  • Public parks
  • Public right-of-ways

That same rule also carries the scopes of work allowed by A-4 through A-19. That is a range label, not sixteen trades — eleven classifications exist in it (there is no A-6, A-8, A-10, A-13 or A-18), and KA is a single license that carries all of them:

A-4Drilling
Horizontal and vertical drilling and boring, wells, dry wells and monitor wells, plus the pumps and pumping equipment that go with them.
A-5Excavating, Grading and Oil Surfacing
Digging, trenching, grading, horizontal boring, compacting and filling, including shoring, casing, geotextiles and liners.
A-7Piers and Foundations
Piers and foundations in concrete, rebar and post-tension, including pile driving, excavation and forming.
A-9Swimming Pools
Pools and spas, including the service lines and the wiring from pool equipment to the first readily accessible disconnect. (authorized, not a service we market)
A-11Steel and Aluminum Erection
Architectural and structural steel and aluminum, reinforcing steel, and field layout, cutting, assembly and erection.
A-12Sewers, Drains and Pipe Laying
Storm drains, water and gas lines, irrigation and sewers, sewer access holes, septic tanks and leach lines, with the related excavation and backfill.
A-14Asphalt Paving
Asphalt paving and fine grading on streets, parking lots and driveways, including height adjustment of existing access holes, valves and cleanouts.
A-15Seal Coating
Seal coating asphalt, crack repair, and painted markings and symbols.
A-16Waterworks
Production and distribution of water — wells, casing and pump, storage tanks, distribution piping, purification and chlorination, and the related electrical and concrete work.
A-17Electrical and Transmission Lines
Transmission and distribution on public right-of-ways: poles, guying, tower line erection, street lighting of all voltages, and underground duct systems — plus transformers, circuit breakers, capacitors and primary metering.
A-19Swimming Pools, Including Solar
The A-9 scope, plus solar heating devices. (authorized, not a service we market)

Why this matters on a bid. Most electrical contractors hold a specialty electrical license only. The CR-11 electrical classification stops at systems under 600 volts and does not reach public right-of-ways — so medium-voltage primary, utility-side distribution and work in the right-of-way sit outside it. Holding A-17 under our KA license is what lets the same company that terminates the gear also set the poles, pull the primary and build the duct bank, rather than handing that scope to a second contractor.

A-17 is transmission and distribution work, principally on public right-of-ways — it is not a substitute for the CR-11 electrical license that covers building systems, and we hold both. Scope language above is from the Arizona Administrative Code and ROC’s published classification materials, condensed for readability; the classification text itself governs. Every license is verifiable at the ROC links on this page.

Bonding

Bonded for commercial & public work

We maintain surety bonding capacity for the contract sizes we pursue, including the bid, performance, and payment bonds required on public projects. Bonding capacity confirms an owner's project can be completed and the trades and suppliers below us get paid.

  • Bid bonds for competitive procurement
  • Performance bonds securing completion
  • Payment bonds protecting subs and suppliers
  • Single and aggregate capacity sized to the work

Specific bonding limits and surety information available on request for qualified projects.

Surety Snapshot

Bid BondsYes
Performance BondsYes
Payment BondsYes
Project & Aggregate LimitsProvided with prequalification package

Insurance

Coverage that meets owner requirements

We carry the lines of coverage commercial and institutional owners require, and we issue certificates of insurance with project-specific additional-insured and waiver-of-subrogation endorsements as contracts demand.

Coverage

General Liability

Commercial general liability covering ongoing and completed operations.

Coverage

Workers' Compensation

Statutory workers' compensation for our field and operating crews.

Coverage

Commercial Auto

Fleet and equipment-transport vehicle coverage.

Coverage

Excess / Umbrella

Umbrella limits available to meet higher contract thresholds.

Coverage

Equipment / Inland Marine

Coverage for our owned heavy-equipment fleet.

On Request

Project-Specific COIs

Additional-insured and waiver endorsements issued per contract.

Standards

How we keep the credentials meaningful

Safety Program

A documented safety program covering trench safety, electrical safety, and equipment operation.

Certified Operators

Trained, certified operators and qualified electrical personnel on the work.

Code Compliance

Work built to NEC, local amendments, and authority-having-jurisdiction requirements.

Need our prequalification package?

We'll send license verification, bonding letters, and certificates of insurance for your prequal or bid requirements.

Request Documentation