Electrical permit history — 4777 E 29th St

Commercial property

4777 E 29th St

Built 2000 — 2000s commercial stock · last permitted panel/service work 2026 (finaled) · HVAC 2023 (finaled)

Permanent link: Electrical permit history for 4777 E 29th St (aztucsonelectricalsolutions.com/property/13104399h/4777-e-29th-st-tucson-az-85711) · Public records last checked 2026-08-17

Parcel

13104399H

Built

2000 (county record)

Jurisdiction

Tucson

Zoning

C-2

Assessor use

Radio Tv Cable Tv Antenna Tv Systems

Parcel size

2.15 acres

Building area

9,967 sq ft (assessor record)

Sewer

Connection on file (2009) (county sewer connection records)

Flood zone

X — minimal flood hazard (FEMA)

Historic preservation

Not on file (City of Tucson HP layers)

Service on record

City records show the 2026 permit was finalized; the permit description states “Deenergize power to building. Open 1600amp GE Power Break II breaker in Panel MDS. Remove and replace the bump stop. This kit replaces the stop block assembly and is used with manual charging mechanisms to properly engage the closed position. Close breaker and reenergize building.”.

See the property

Pima County orthophoto (Pictometry 2024 / PAG 2023 / NAIP 2023 mosaic) — parcel outlined in yellow. Aerials can predate recent work and show nothing about what is inside; context, not evidence.

Street ViewGoogle Maps satelliteGoogle Earth (3D, historical imagery) ↗

Is it time to upgrade?

• Electrical service & distributionCurrentLast permitted this year (2026). City inspection record: COT - LCEL - Electrical Final approved 2026-04-03. Worth reading the permit itself: it names the service but does not read as an increase in capacity, so this may have been a like-for-like replacement rather than an upgrade. Separately from replacement: NFPA 70E expects the arc-flash study to be reviewed at least every five years, or after any change to the service. TC-COM-0126-00094 — Deenergize power to building. Open 1600amp GE Power Break II breaker in Panel MDS. Remove and replace the bump stop. This kit replaces the stop block assembly and is used with manual charging mechanisms to properly engage the closed position. Close breaker and reenergize building.
• Heating, cooling & mechanicalCurrentLast permitted 2023 (3 years ago). City inspection record: last recorded inspection 2023-04-17; no approved final is shown. Packaged rooftop units work harder in Tucson than almost anywhere, so 12 to 15 years is a realistic service life rather than the 15 to 20 the industry quotes. TC-COM-0223-00684 — Provide and install new Square D 250amp Panelboard for Temporary Chiller System. New Panelboard (Panel AC-4) fed from existing MDS #20-22-24.
• Fire alarm & life safetyCurrentLast permitted 2025 (1 year ago). Panels and devices age out on their own schedule, and the code moves underneath them — a system that was compliant when installed is not automatically compliant now. TF-FCP-1025-00871 — Add one new fire alarm relay to control a new smoke damper.
• RoofNot in this windowNothing in the permit records we read for this parcel that names this system. Roof age matters electrically too: it sets what can be penetrated for new rooftop units, conduit, or solar.

A found permit means a lot. A missing one means less. We read the City of Tucson’s own permit file, not a recent extract of it — back to about 2006, and into the 1990s on properties with that much history. Microfiche before then was never fully digitised. Every record links to the city’s official file. A blank line does not say nothing was done: work gets done without permits all the time. The only way to know what is actually installed is to look at it.

What that usually means electrically

• Era-based check

  Gear in this age range is usually still supported but is due for infrared scanning and torque verification if that has not been done recently. The permit record does not confirm this; an on-site inspection is required.

• Era-based check

  NFPA 70E expects arc-flash studies to be reviewed at least every five years, or after any change to the service. Buildings this age often have labeling that no longer matches the installed gear. The permit record does not confirm this; an on-site inspection is required.

Recorded sales (1)

Recorded sales are the sales the Pima County Assessor has on file from affidavits of property value — not every transfer, not listings, and not a valuation. Parties are never shown here. A sale with no permitted electrical work since is worth knowing before the next sale or a remodel.

Most recent permit on record for this parcel: 2026-01-23 (TC-COM-0126-00094) — Deenergize power to building. Open 1600amp GE Power Break II breaker in Panel MDS. Remove and replace the bump stop. This kit replaces the stop block assembly and is used with manual charging mechanisms to properly engage the closed position. Close breaker and reenergize building..

Permit history (28)

How to read the status column: Final / Complete / C of O — city records show the permit was finalized. Issued — the work was permitted, but final completion is not confirmed. Applied / In review / Approved / Fees paid — proposed, not completion. Expired — the permit expired without a confirmed final status. Void / Withdrawn / Canceled — not evidence the work was installed. Any other status is shown exactly as the issuing office records it, without a completion reading.

Code enforcement (7)

Code cases and housing-code violations recorded against this parcel, by category. Closed cases stay on the record, and most of these are closed — check the status column. We show the category and the official record number rather than the complaint text, which often names people who have nothing to do with the property.

Record numbers link to the City of Tucson’s official file. Highlighted rows are the ones that imply electrical work or an unpermitted-work finding.

This is an inference from public records — the year a structure was built, how it is classified, and what has been permitted. It is not an inspection, and nothing here confirms what is actually installed at this address. The only way to know is to look in the panel. See an error in this public-record report? Report a correction · About this data.

The contractor’s read is a plain-English brief of the record above, written by AI — what it shows across electrical, mechanical and the building itself, what is missing for the era, and what to verify on site.